Audio Transformers and Microphone Capsules by BeesNeez Pro Audio

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Matt Nolan said:
Are the inner layer holes at an angle?

Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.

 
mics said:
Matt Nolan said:
Are the inner layer holes at an angle?

Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.
Fascinating. Thanks Ben.
 
Hi, we are happy to be able to offer you a C12 microphone build. Using the high quality Australian made microphone body, a circuit, Capsule, PSU, Mount and Leads.

Here is a link to the page for this microphone: http://beesneezmics.com/diy-microphone-range/beesneez-diy-microphone/beesneez-c12-diy-body-kit.html
 
Hey Veronica or Ben,

I wanted to ask, if you know if I would have to pay customs when ordering capsules from you to either Belgium or Germany?
Probably yes, but I wanted to be sure...

Greetings,
Merlin
 
Hi Marlin, thanks for your customs question.

Unfortunately, customs charges are at the mercy of the receiving nation.  We price the invoice accordingly and the rest is up the them.

Thanks.

Ben
 
Its the end of financial year in Australia so we have put all our in stock DIY items on sale to clear the shelves.
https://www.beesneezmicrophones.com.au/store/index.php
 
Hi all.

The M49 body kits are ready to roil out the door. 

Please see the feeler thread for details.

Cheers
 
mics said:
Hi all.

The M49 body kits are ready to roil out the door. 

Please see the feeler thread for details.

Cheers
i can't find the feeler thread, interested in the m49 body kits... can you give me details please?
 
mics said:
Hi Matt. 

Nice observation but they're not at an angle. It is a specialised bevelling process I apply to the capsules during the production stage. 

I got the idea from an old red ck12 that I rebuilt. It was done this way and simply sounded more precise front to back than any other I had previously heard.

Interesting! The CK12 capsule that's taken apart at the Austrian Audio blog appears to have all the holes bevelled, too.
 
RPC360 said:
Interesting! The CK12 capsule that's taken apart at the Austrian Audio blog appears to have all the holes bevelled, too.

Yes your are right. There have been at least a dozen different versions that i have measured and repaired over the last 16 years.

Cheers
 
Hi All.

Just a quick message to let you all know we now have transformers available that we have hand wound in our factory.

Not Chinese made;

Bv8
Bv11
Bv12

$69usd each or $50usd in a group buy of 50pcs min.

Cheers.

Ben
 
Hi ben and Veronica,
I just received the K7 capsule and b-bv08 capsule after a long wait. Seems like shipping from Australia to Sweden can take a very long time :) Is there a schematic/ pin out diagram for the B-bv08 transformer?
Thanks alot!
/Mats
 
Hi Ben,

Just so you know, I used your K7 capsule in a DIY FET47 and it sounds stunning. Big, clear, and rich. I couldn't be more pleased.

Thank you!
 
mics said:
Hi All.

Just a quick message to let you all know we now have transformers available that we have hand wound in our factory.

Not Chinese made;

Bv8
Bv11
Bv12

$69usd each or $50usd in a group buy of 50pcs min.

Cheers.

Ben
Are these still available?

Best,
Dirk
 
Hi there, sure are still available. We have approx 200 in stock.

Thanks
 
Back
Top