Just built the x51 version and must say was definitely impressed with the quality of components and I can't wait to get the PSU for it and of course some modules to plug into! ;D
The only problem I ran into which is a screwup on my part is the top edge part of one of the edge connectors isn't flush with the PCB board. There's about .500mm gap of space between that tab of the edge connector and the PCB. Would this be something I should worry about? :-\
Thanks.
The only problem I ran into which is a screwup on my part is the top edge part of one of the edge connectors isn't flush with the PCB board. There's about .500mm gap of space between that tab of the edge connector and the PCB. Would this be something I should worry about? :-\
Thanks.
![[silent:arts]](https://cdn.imagearchive.com/groupdiy/data/avatars/s/0/172.jpg?1620371656){kind=avatar}
