Chinese Phantom powered tube microphone?

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Why does that tube daughterboard look like it's connected to (only) that one big fat solder pad on that second PCB? Which, by the way, seems to host a Schoeps-type oscillator (single NPN transistor, and the two green inductors are just behind the metal cap of the tube - metal cap which "should" be either the anode or the grid, and yet is connected nowhere).
 
Generally, the 48V phantom power supply for microphones supplies very small current. After boosting, it may not be able to meet the current of the tube heater,The tube may only be used as a light bulb here.
 
The tube appears to be a high-voltage rectifier from the CRT TV days. The cap on the tube is the anode which isn't connected to anything.. Oh, by the way, the anode voltage on these tubes was about 20,000 volts! Very strange.
 
Yeah, must be a Chinese version of the 1960s 1X2B.
 

Attachments

  • 1X2.png
    1X2.png
    321.5 KB · Views: 0

Latest posts

Back
Top